DTF Gang Sheets

Upload your pre-built (ready to print) high resolution (300dpi) gang sheet as a transparent png. All gang sheets will now be printed with our new hot peel film, just press and peel.
1. Select your gang sheet size.
2. Select your quantity.
3. Upload your artwork.
4. Then add to cart.
Need help? Don't hesitate to call
 
Looking for DTF gang sheets longer than 20 feet, simply change the quantity to "2" and now you have a 40 foot gang sheet! Your DTF transfers can be printed on our gang sheets, so all you need is a heat press. Buy now! 
 
Template Requirements
*Vector Preferred / 300+ DPI Preferred
*Embed any imported files 
*DO NOT Mirror Images
*Transparent backgrounds only
*Expand all text to paths
 
How to use with Heat Press
NOTE: Pre-Heat your Heat Press to reach 300-320 degrees.
1. Press your blank apparel on the side you will have your
design,
to give it a nice smooth surface.
2. Place your DTF Transfer in the exact location you want.
3. Cover your DTF Transfer with teflon on or parchment paper
of the
same size or larger. This will help avoid your transfer from
lifting.
4. Use your preheated Heat Press at 300-325 degrees to press
down
with heavy pressure for 20-25 seconds.
5. Once cooled down about 2-5 mins depending on room
temperature, peel off the backing of your DTF transfer.
6. Do a final press of 7-10 seconds using teflon or parchment paper
 
How to use with Home Iron
Using an iron:
1. Set your iron to the highest cotton setting without
steam.

2. Preheat your garment for a few seconds to remove any moisture and wrinkles.

3. Place the transfer face down on the garment, making sure it's centered and
aligned.

4. Apply firm and even pressure while moving the iron in a circular motion for
about 20-30 seconds.

5. Allow the transfer to cool down completely before peeling off the backing
paper.
6. Do a final press of 7-10 seconds using teflon or parchment paper